メインコンテンツにスキップ

Microsoft Surface Pro 6 마더보드 어셈블리 교체

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
韓国語

手順 15を翻訳中

手順15
Microsoft Surface Pro 6 Motherboard Assembly Replacement, Disconnect the headphone jack: 手順 0、 3の画像 1 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Disconnect the headphone jack: 手順 0、 3の画像 2 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Disconnect the headphone jack: 手順 0、 3の画像 3
Disconnect the headphone jack
  • Use the point of a spudger to flip up the small locking flap securing the headphone jack cable ZIF connector.

  • Slide the headphone jack cable straight out of its socket on the motherboard.

Spudger/스퍼저의 끝을 사용하여 헤드폰 잭 케이블 ZIF 커넥터를 고정하는 작은 잠금 덮개를 뒤집으세요.

헤드폰 잭 케이블을 마더보드 소켓에서 슬며시 빼세요.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります