修理を始めるには コミュニティ ストア

Microsoft Surface Pro 6 마더보드 어셈블리 교체

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

ガイドに戻る
英語
韓国語
前の手順 次の手順

手順 6を翻訳中

手順6
Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the camera connector shield: 手順 0、 3の画像 1 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the camera connector shield: 手順 0、 3の画像 2 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the camera connector shield: 手順 0、 3の画像 3
Remove the camera connector shield

  • Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the camera connectors.

  • Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.

  • Repeat this procedure at different points around the shield until it is free. Remove the shield.

  • Try not to deform the shield too much—you will need to reinstall it during reassembly.

카메라 커넥터 실드 분리하기

핀셋의 한 뾰족한 부분을 카메라 커넥터를 덮고 있는 EMI 실드 가장자리의 틈에 끼우세요.

핀셋을 사용하여 디스플레이를 구부리지 않으며 디스플에이에서 최대한 멀찍이 EMI 실드를 들어 올리세요.

실드가 자유롭게 분리될 때까지 실드 주변의 다른 부분에도 이 절차를 반복하세요. 실드를 분리하세요.

실드를 너무 많이 변형하지 마세요—재조립할 때 실드를 다시 설치해야 합니다.

[title] Remove the camera connector shield
-[* black] Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the camera connectors.
+[* black] Insert one point of a pair of [product|IF145-020-2|pointed tweezers] into a gap in the corner of the EMI shield covering the camera connectors.
[* black] Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.
[* black] Repeat this procedure at different points around the shield until it is free. Remove the shield.
[* icon_caution] Try not to deform the shield too much—you will need to reinstall it during reassembly.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。