メインコンテンツにスキップ

Microsoft Surface Laptop 3 15インチ ヒートシンクとファンの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
Microsoft Surface Laptop 3 15" Heatsink and Fan Replacement, Remove the tape: 手順 0、 3の画像 1 Microsoft Surface Laptop 3 15" Heatsink and Fan Replacement, Remove the tape: 手順 0、 3の画像 2 Microsoft Surface Laptop 3 15" Heatsink and Fan Replacement, Remove the tape: 手順 0、 3の画像 3
Remove the tape
  • Use a pair of tweezers to remove the two pieces of black tape covering the bottom left and bottom right corners of the motherboard.

  • During reassembly, if the tape is sticky enough to be reused, reapply it.

ピンセットを使って、マザーボードの左下と右下の角を覆っている2枚の黒いテープを取り除きます。

再組み立ての際に、テープの粘着力が十分であれば、再度貼り付けてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります