メインコンテンツにスキップ

15寸微软 Surface Laptop 3 SSD 更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての19個のガイドに反映されます。

英語
中国語

手順 2を翻訳中

手順2
Microsoft Surface Laptop 3 15" SSD Replacement, Remove the SSD: 手順 0、 2の画像 1 Microsoft Surface Laptop 3 15" SSD Replacement, Remove the SSD: 手順 0、 2の画像 2
Remove the SSD
  • With the SSD screw removed, the SSD will pop up at a shallow angle.

  • Grip the end of the SSD and pull it away from its board connector to remove it.

  • During reassembly, insert the SSD at a shallow angle into its board connector, and secure it back into its horizontal position with the SSD screw.

卸下 SSD 螺丝后,SSD 会以较浅的角度弹出。

抓住 SSD 的末端并将其从其接口中拉出以将其卸下。

在重新组装期间,将 SSD 以小角度插入其板接口,然后用 SSD 螺丝将其固定回水平位置。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります