手順 3を翻訳中
手順3
-
Carefully slide an opening pick under the camera to separate it from the Surface.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
Carefully slide an opening pick under the camera to separate it from the Surface.
The camera is held in place with light adhesive. If it does not easily remove, apply a few drops of high-strength isopropyl alcohol (≥90%) under the camera, wait one minute, then try again.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
次の行
前の行
下に新しい行を挿入
上に新しい行を挿入
現在の行をインデントする
現在の行をインデント解除する
現在の行を削除する
次の手順に移動します。
前の手順に移動します。
ヘルプを開く