How to safely and securely destroy data on SSDs and memory sticks

英語

イタリア語

手順 4を翻訳中

手順4

Use a Drill

If you don't have a cold chisel or a dremel you can also drill through the memory chips, preferably using a pillar drill or drill press.
Use a metal drill bit, since the fibreglass pcb will dull a wood drill bit. In fact, silicon is harder than steel so a masonry drill bit may be preferable.
Place the device on a surface you don't mind drilling through, like a wooden plank.
Drill through the memory chip. Since silicon is hard and brittle, the chip may crack rather than yielding to the drill. Nevertheless, your job is done!
Take care not to inhale the fibreglass dust that will be created.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。