手順 2を翻訳中
手順2
Expose the YAW Sensor
-
The right half of the handle should now be free to slide off of the square sensor body at the top of the white center post.
-
Lay down next to the white center post, being careful not to stress the wires.
-
Lift the sensor body strait up and clear of the white center post. Note the orientation of the D-flat on the sensor "knob", it should be facing away from the solder tabs and towards the right half of the handle.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。