修理を始めるには コミュニティ ストア

Sostituzione cover posteriore Samsung Galaxy Note20

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
前の手順 次の手順

手順 4を翻訳中

手順4
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 1 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 2 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 3
Cut along the perimeter of the rear cover

  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

Taglia attorno al perimetro del telefono

Ripeti la procedura di riscaldamento e taglio dell'adesivo per gli altri tre lati della cover posteriore rimasti.

Puoi inserire un nuovo plettro nelle fessure create dai plettri lasciati in ogni angolo.

Mentre procedi, lascia un plettro in ogni angolo per evitare che l'adesivo si reincolli.

Se la cover posteriore è ancora attaccata al telaio dopo aver tagliato lungo tutti e quattro i lati, prova a far passare di nuovo un plettro attraverso l'adesivo.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。