メインコンテンツにスキップ

光学ドライブの取り外し

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 5を翻訳中

手順5
Optical Drive Removal, Disconnect the power and data cables: 手順 0、 3の画像 1 Optical Drive Removal, Disconnect the power and data cables: 手順 0、 3の画像 2 Optical Drive Removal, Disconnect the power and data cables: 手順 0、 3の画像 3
Disconnect the power and data cables
  • Use a pair of blunt tweezers to grip the edges of the optical drive power connector and pull up to disconnect it from the optical drive.

  • Always pull cables by their connectors and not the wires themselves.

  • Use your fingers to pull up and disconnect the data cable from the optical drive.

先の鋭利でないピンセットを使って、光学ドライバーの電源コネクタの端を摘んで、光学ドライブから接続を外します。

ワイヤではなく、コネクタ自体を摘んでケーブルを抜いてください。

指を使って、光学ドライブからデータケーブルの接続を引き抜きます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります