修理を始めるには コミュニティ ストア

Sostituzione Scheda Antenna Wi-Fi Xbox Serie X

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
前の手順

手順 2を翻訳中

手順2
Xbox Series X Wi-Fi Antenna Board Replacement: 手順 0、 3の画像 1 Xbox Series X Wi-Fi Antenna Board Replacement: 手順 0、 3の画像 2 Xbox Series X Wi-Fi Antenna Board Replacement: 手順 0、 3の画像 3

  • Grip the antenna board and pull it directly away from the center chassis to disconnect it.

  • Don't pull the antenna board up until it's completely disconnected.

  • Remove the antenna board.

  • During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

Afferra la scheda dell'antenna ed estraila direttamente dal centro della scocca per scollegarla.

Non piegare la scheda dell'antenna verso l'alto fino a che non è completamente scollegata.

Rimuovi la scheda dell'antenna.

Durante il riassemblaggio, allinea il connettore della scheda con la porta al centro della scocca e premi per ricollegare il tutto.

[* black] Grip the antenna board and pull it directly away from the center chassis to disconnect it.
- [* icon_caution] Don't pull the antenna board ***up*** until it is completely disconnected.
+ [* icon_caution] Don't pull the antenna board ***up*** until it's completely disconnected.
[* black] Remove the antenna board.
[* icon_reminder] During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。