修理を始めるには コミュニティ ストア

Xbox Series X Vervanging van de ventilator

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての31個のガイドに反映されます。

ガイドに戻る
英語
オランダ語
前の手順

手順 3を翻訳中

手順3
Xbox Series X Fan Replacement, Remove the fan: 手順 0、 2の画像 1 Xbox Series X Fan Replacement, Remove the fan: 手順 0、 2の画像 2
Remove the fan

  • Slide the fan out of its slot to remove it.

  • During reinstallation, note that the fan can only be installed one way—make sure Master Chief is facing you.

  • If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.

Verwijder de ventilator

Schuif de ventilator uit de inkeping om deze te verwijderen.

Let er, bij het weer in elkaar zetten van het toestel, op dat de ventilator slechts op één manier kan worden geïnstalleerd—zorg dat de Master Chief naar je toe gericht is.

[title] Remove the fan
[* black] Slide the fan out of its slot to remove it.
- [* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full|Master Chief|new_window=true] is facing you.
+[* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full|Master Chief|new_window=true] is facing you.
+ [* icon_note] If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。