注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての27個のガイドに反映されます。
手順 4を翻訳中
手順4
Unclip the back panel
-
Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base.
-
Pry up the back panel to release it from the locking clips.
| [title] Unclip the back panel | |
| [* black] Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base. | |
| - | [* black] |
| + | [* black] Pry up the back panel to release it from the locking clips. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。