メインコンテンツにスキップ

iPhone 12 Pro Displayeinheit tauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
ドイツ語

手順 9を翻訳中

手順9
iPhone 12 Pro Display Assembly Replacement, Separate the right adhesive: 手順 0、 3の画像 1 iPhone 12 Pro Display Assembly Replacement, Separate the right adhesive: 手順 0、 3の画像 2 iPhone 12 Pro Display Assembly Replacement, Separate the right adhesive: 手順 0、 3の画像 3
Separate the right adhesive
  • Slide the opening pick around the bottom right corner of the iPhone to separate its adhesive.

  • Continue sliding up the right edge of the iPhone until you reach the top right corner.

  • Don't insert your pick more than 3 mm, as you may damage internal components.

  • Leave the pick in the top right corner before continuing.

Schiebe das Plektrum um die untere rechte Ecke des iPhones herum, um den Kleber aufzutrennen.

Schiebe das Plektrum weiter an der rechten Seite entlang, bis du die obere rechte Ecke erreicht hast.

Setze das Plektrum nicht tiefer als 3 mm ein, du könntest Bauteile im Inneren beschädigen.

Lasse das Plektrum in der oberen rechten Ecke stecken.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります