メインコンテンツにスキップ

更换谷歌 Pixel 4a 5G 屏幕

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

英語
中国語

手順 3を翻訳中

手順3
Google Pixel 4a 5G Screen Replacement, Insert an opening pick: 手順 0、 3の画像 1 Google Pixel 4a 5G Screen Replacement, Insert an opening pick: 手順 0、 3の画像 2 Google Pixel 4a 5G Screen Replacement, Insert an opening pick: 手順 0、 3の画像 3
Insert an opening pick
  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

  • Place a suction cup as close to the right edge of the screen as possible.

  • Lift the suction cup with a strong steady force.

  • Insert the tip of an opening pick into the screen seam no more than 1 mm.

如果显示屏破裂严重,用一层透明胶带覆盖可以让吸盘吸附。另外,也可以使用非常结实的胶带代替吸盘。如果其他办法都不奏效,您可以用超级胶水将吸盘粘在破裂的屏幕上。

将吸盘尽可能靠近屏幕右边缘。

用强大而稳定的力量提起吸盘。

将开口镐的尖端插入 "筛缝","''不超过 1 毫米。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります