メインコンテンツにスキップ

Google Pixel 4a 5G スクリーンの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
Google Pixel 4a 5G Screen Replacement, Insert an opening pick: 手順 0、 3の画像 1 Google Pixel 4a 5G Screen Replacement, Insert an opening pick: 手順 0、 3の画像 2 Google Pixel 4a 5G Screen Replacement, Insert an opening pick: 手順 0、 3の画像 3
Insert an opening pick
  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

  • Place a suction cup as close to the right edge of the screen as possible.

  • Lift the suction cup with a strong steady force.

  • Insert the tip of an opening pick into the screen seam no more than 1 mm.

ディスプレイのダメージが大きい場合は、透明な強力テープをスクリーンに貼って吸盤カップを装着するとうまく固定します。あるいは、強力なテープを吸盤カップの代わりに持ち手を作って引っ張ることもできます。それでも上手くいかない場合は、壊れたスクリーンに吸盤カップを装着する際に、カップ上に強力ボンドを付けてください。 

吸盤カップをスクリーンの右端に近い位置に装着します。

吸盤カップを一定の強い力で引き上げます。

開口ピックの先端を、スクリーンのシームから1mm以上差し込まないでください

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります