メインコンテンツにスキップ

更换谷歌 Pixel 4a 5G 屏幕

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

英語
中国語

手順 1を翻訳中

手順1
Google Pixel 4a 5G Screen Replacement, Precautionary Notes: 手順 0、 3の画像 1 Google Pixel 4a 5G Screen Replacement, Precautionary Notes: 手順 0、 3の画像 2 Google Pixel 4a 5G Screen Replacement, Precautionary Notes: 手順 0、 3の画像 3
Precautionary Notes
  • You will need to pry the screen up to remove it from the phone. Read the following notes carefully before proceeding.

  • Take note of the two seams on the edge of your phone:

  • Screen seam: This seam separates the screen from the rest of the phone. This is where you have to pry.

  • Frame seam: This is where the plastic frame meets the back cover. It is held in place by screws. Do not pry at this seam.

  • Before you begin, note the following areas on the screen:

  • Screen flex cable: Do not insert the opening pick deeper than instructed or you risk damaging this cable.

  • Adhesive perimeter: Prying beyond this narrow perimeter without angling the pick will damage the OLED panel.

您需要撬起屏幕才能将其从手机上取下。继续操作前请仔细阅读以下注意事项。

注意手机边缘的两条接缝:

屏幕接缝:这条接缝将屏幕与手机的其他部分隔开。'''这是你必须撬开的地方。

框架接缝:''这是塑料框架与后盖相接的地方。它由螺丝固定。请勿撬动此接缝。

开始之前,请注意屏幕上的以下区域:

屏幕软电缆:''请勿将开口拾取器插入比指示更深的位置,否则有损坏该电缆的风险。

粘合剂周边:''在不调整撬棒角度的情况下撬动超出这个狭窄的周边会损坏 OLED 面板。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります