Nintendo Switch 스크린 교체

英語

韓国語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

Nintendo Switch 후면 패널 교체하기

Nintendo Switch Micro SD 카드 리더 교체하기

Nintendo Switch 실드 플레이트 교체

Nintendo Switch 배터리 분리 선행 작업

Nintendo Switch 방열판 교체

Nintendo Switch 헤드폰 잭 및 게임 카드 리더 교체

ガイド情報

= 完了 = 不完全

交換する部品は何ですか？

タイトル

はじめに

Follow this guide to replace a broken or faulty screen on the Nintendo Switch game console. ***This procedure replaces both the LCD panel and the digitizer as a whole unit.*** To replace just the digitizer, follow [guide|140040|this guide]. To replace just the LCD panel, follow [guide|117395|this guide].

The Switch uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.

***Note:*** When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste. You will, however, need regular replacement thermal paste for the CPU.

You can complete this repair without removing the heat sink and the game card reader, but it makes disconnecting and reconnecting the LCD panel ribbon cable much more difficult. Keep this in mind when you perform this repair.

***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).

終わりに