メインコンテンツにスキップ

MacBook Pro 13インチ Touch Bar 2018 バッテリーの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Protect the display and keyboard: 手順 0、 3の画像 1 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Protect the display and keyboard: 手順 0、 3の画像 2 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Protect the display and keyboard: 手順 0、 3の画像 3
Protect the display and keyboard
  • The liquid adhesive remover provided in your kit can cause damage if it contacts the MacBook Pro's display or keyboard.

  • To protect your display, place a sheet of aluminum foil between the display and keyboard and leave it there while you work.

  • Additionally, use some tape and/or foil to seal off the area under the trackpad. Optionally, you may also layer an absorbent towel directly underneath the trackpad area to soak up any excess adhesive remover.

キットに含まれている液体接着剤リムーバーは、MacBook Proディスプレイ上の反射防止コーティングとプラスチックのキーボードキーにダメージを与えてしまいます。

ディスプレイを保護するため、作業中はディスプレイとキーボードの間にアルミフォイルシートを装着してください。

さらに、ペンキ用などの剥がしやすいテープをトラックパッドエリアに装着してください。オプションとして、余分な接着剤リムーバーが飛び散らないように、トラックパッドエリアの下に直接紙タオルなどを載せてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります