手順 3を翻訳中
手順3
Insert an opening pick
-
Once the screen is warm to the touch, apply a suction handle to the bottom edge of the phone.
-
Lift the screen with the suction handle to create a small gap between the screen and the frame.
-
Insert the tip of an opening pick in the gap between the midframe and the screen.
-
Slide the opening pick to the bottom left corner to cut the adhesive. Leave it in its place to prevent the adhesive from resealing.
| [title] Insert an opening pick | |
| [* black] Once the screen is warm to the touch, apply a suction handle to the bottom edge of the phone. | |
| - | [* icon_note] If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed. |
| + | [* icon_note] If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed. |
| [* black] Lift the screen with the suction handle to create a small gap between the screen and the frame. | |
| [* black] Insert the tip of an opening pick in the gap between the midframe and the screen. | |
| - | [* black] Slide the opening pick to the bottom |
| + | [* black] Slide the opening pick to the bottom left corner to cut the adhesive. Leave it in its place to prevent the adhesive from resealing. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。