メインコンテンツにスキップ

iMac Intel 27インチ 2012-2019 接着ストリップの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 21を翻訳中

手順21
iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 2の画像 1 iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 2の画像 2
  • Set the display back on the iMac's rear enclosure.

  • At this time, plug in your iMac, power it on, and test your repair before sealing up the computer. Be sure to check for full functionality of any hardware you removed or disconnected.

  • When you are finished, shut the iMac down and unplug the power cord before you continue.

ディスプレイをiMacの背面エンクロージャに戻します。

デバイスを密閉する前に、iMacの電源を入れて、修理をテストしてください。 取り外したり、接続を外した全ハードウェアの機能を必ず確認してください。

作業が終わったら、iMacを密封して、次の手順に移る前に電源コードを抜いてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります