MacBook Air 13インチ Mid 2013 ロジックボードアセンブリの交換

注意：あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

ガイドに戻る

英語

日本語

前の手順次の手順

手順 5を翻訳中

手順5

MacBook Air 13" Mid 2013 Logic Board Assembly Replacement: 手順 0、 2の画像 1

MacBook Air 13" Mid 2013 Logic Board Assembly Replacement: 手順 0、 2の画像 2

Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket.
Be sure you are prying up on the hinged retaining flap, not the socket itself.
Pull the trackpad ribbon cable straight out of its socket toward the front edge of the Air.
During reassembly, ensure that this cable is inserted fully into the connector. If not, your keyboard, trackpad, or battery may not work as expected.

	[* black] Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket.
	[* icon_caution] Be sure you are prying up on the hinged retaining flap, *not* the socket itself.
	[* black] Pull the trackpad ribbon cable straight out of its socket toward the front edge of the Air.
+	[* icon_reminder] During reassembly, ensure that this cable is inserted fully into the connector. If not, your keyboard, trackpad, or battery may not work as expected.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。