メインコンテンツにスキップ

Reemplazo del marco medio del Samsung Galaxy A51

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
スペイン語

手順 2を翻訳中

手順2
Samsung Galaxy A51 Midframe  Replacement: 手順 0、 3の画像 1 Samsung Galaxy A51 Midframe  Replacement: 手順 0、 3の画像 2 Samsung Galaxy A51 Midframe  Replacement: 手順 0、 3の画像 3
  • The midframe is held in place by plastic clips.

  • Insert an opening pick between the midframe and front panel assembly on the bottom of the phone near the charge port.

  • Slide the opening pick to the left bottom corner to release the plastic clips.

  • Slide the opening pick to the bottom right corner to release the rest of the bottom plastic clips.

El marco medio se mantiene en su lugar con clips de plástico.

Inserta una púa de apertura entre el marco medio y el ensamblaje del panel frontal en la parte inferior del teléfono cerca del puerto de carga.

Desliza la púa de apertura en la esquina inferior izquierda para liberar los clips de plástico.

Desliza la púa de apertura en la esquina inferior derecha para liberar el resto de los clips de plástico inferiores.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります