メインコンテンツにスキップ

Remplacement de l'écran complet du MacBook Pro 13" Unibody mi-2009

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

英語
フランス語

手順 7を翻訳中

手順7
MacBook Pro 13" Unibody Mid 2009 Display Replacement: 手順 0、 2の画像 1 MacBook Pro 13" Unibody Mid 2009 Display Replacement: 手順 0、 2の画像 2
  • Use your Torx driver to remove the two outer 6.5 mm screws securing each of the two display brackets to the upper case (4 screws total).

  • Mid 2009 models require a T6 Torx driver, while Mid 2010 models require a T8.

Dévissez les deux vis extérieures Torx de 6,5 mm fixant les deux supports de l'écran au boîtier supérieur (4 vis au total).

-[* red] Remove the two outer 6.5 mm Torx screws securing each of the two display brackets to the upper case (4 screws total).
+[* red] Use your Torx driver to remove the two outer 6.5 mm screws securing each of the two display brackets to the upper case (4 screws total).
+ [* icon_note] Mid 2009 models require a T6 Torx driver, while Mid 2010 models require a T8.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります