手順 10を翻訳中
手順10
-
Install the following wires to the power supply (page 10-24 of Service Manual):
-
Red and black wires (PSU TB3) to connector TB3
-
Red and black wires (PSU TB2) to connector TB2
-
Blue, green, and brown wires from the AC mains panel to connector TB1
-
When installing, push the wires completely into the connectors.
-
No wires should be visible after being tightened at the terminal block.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。