メインコンテンツにスキップ

Sostituzione batteria Sony WH-1000XM2

英語
イタリア語

手順 1を翻訳中

手順1
Sony WH-1000XM2 Battery Replacement, Removing the Earpads and Foam: 手順 0、 3の画像 1 Sony WH-1000XM2 Battery Replacement, Removing the Earpads and Foam: 手順 0、 3の画像 2 Sony WH-1000XM2 Battery Replacement, Removing the Earpads and Foam: 手順 0、 3の画像 3
Removing the Earpads and Foam
  • The Battery is on the right side where the charging port is.

  • The Earpads are held in place by 6 notches. You need to get next to them under the plastic ring that goes around the pad. Best would be with a plastic spudger but you could do it with anything flat and thin. Once you have popped one notch you can probably pull the whole thing off. If not just pop the rest with the same method.

  • Be sure to remember which way the earpad was in, as they only fit in one direction.

  • Now you need to get behind the inserted foam to the marked 4 screws(orange). You can remove the foam entirely like me. Its held on with a few small dots of glue. Or you can probably also just lift the foam and get to the screws that way

La batteria è sul lato destro, dove si trova la porta di carica.

I padiglioni sono tenuti fermi da 6 sporgenze. devi avvicinarti a queste da sotto l'anello in plastica che passa attorno al padiglione. Sarebbe meglio con un uno spudger in plastica, ma puoi usare qualsiasi cosa piatta e sottile. Dopo aver rilasciato la prima, potrai probabilmente tirare via l'intero padiglione. Se non riesci, rilascia le restanti.

Assicurati di ricordare in che direzione era montato il padiglione, in quanto si possono montare in solo quella direzione.

Ora dovrai andare dietro la schiuma fino alle 4 viti evidenziante (in arancione). Puoi rimuovere del tutto la schiuma come ho fatto io: è tenuta ferma da qualche goccia di colla. Oppure puoi probabilmente anche solo sollevare la schiuma per scoprire le viti.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります