2019年款13寸 MacBook Pro 带双 Thunderbolt 端口电池更换

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

ガイドに戻る

英語

中国語

前の手順次の手順

手順 8を翻訳中

手順8

MacBook Pro 13" Two Thunderbolt Ports 2019 Battery Replacement: 手順 0、 3の画像 1

MacBook Pro 13" Two Thunderbolt Ports 2019 Battery Replacement: 手順 0、 3の画像 2

MacBook Pro 13" Two Thunderbolt Ports 2019 Battery Replacement: 手順 0、 3の画像 3

After 2-3 minutes have passed, slide a plastic card under the edge of the battery cell where you applied the adhesive remover.
It may help to gently twist the card to open up a slight gap between the battery cell and the MacBook Pro's case.

-	[* black] After 2-3 minutes have passed, slide a plastic card under the edge of the battery cell where you applied the adhesive remover.
+	[* black] After 2-3 minutes have passed, slide a [product\|IF145-101\|plastic card] under the edge of the battery cell where you applied the adhesive remover.
	[* icon_note] It may help to gently twist the card to open up a slight gap between the battery cell and the MacBook Pro's case.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。