メインコンテンツにスキップ

三星 Galaxy A50 电池更换

英語
中国語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

三星 Galaxy A50 SIM 托盘更换

三星 Galaxy A50 后盖更换

三星盖乐世 A50 中框更换

断开电池

ガイド情報

= 完了 = 不完全
      If possible, turn on your device and test your repair before installing new adhesive and resealing.[br]
      [br]
      Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.[br]
      [br]
      To reassemble your device, follow these instructions in reverse order. Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).[br]
      [br]
      For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
      [br]
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].[br]
      [br]
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20A50|Answers community] for help.

      ガイドの手順

      手順1

      使用撬棒的平端撬起并断开互连,并从主板上显示柔性电缆。

      手順2

      使用撬棒的平端撬起并断开充电端口,并显示子板的柔性电缆。

      手順3

      粘住三星 Galaxy A50 中电池的粘合剂非常牢固。

      手順4

      在此过程中,请尽量不要使电池变形。软壳锂离子电池可能会泄漏危险的化学物质,着火甚至损坏,甚至爆炸。请勿用力过大或用金属工具撬动电池。

      手順5

      取出电池。

      クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります