メインコンテンツにスキップ

iPod Touch 7e generatie Vervanging van de voorste camera

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
オランダ語

手順 1を翻訳中

手順1
iPod Touch 7th Generation Front Camera Replacement: 手順 0、 2の画像 1 iPod Touch 7th Generation Front Camera Replacement: 手順 0、 2の画像 2
  • Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly.

  • There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.

Gebruik het platte einde van een spudger om de naar voren gerichte camera uit het contact op de schermmodule los te klappen.

Er is een kleine hoeveelheid lijm die de cameramodule aan het contact bevestigt, maar dit zou niet al te veel kracht moeten vereisen. Gebruik een spudger om tussen het zwarte plastic van de cameramodule en het zwarte plastic van het contact te komen en deze van elkaar te scheiden.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります