iPod Touch 7th Generation Battery Replacement

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語

韓国語

手順 3を翻訳中

手順3

There are three notches on either side of the battery. In the next few steps, you will be using these notches to gradually pry the battery up from the rear case.
The battery is secured with large amounts of adhesive, so you'll need to go slowly and carefully to avoid puncturing or creasing the battery.
Insert a plastic opening tool into the top right notch and gently pry up on the battery.
Do not attempt to pry up the entire battery at this point; you just want to start to loosen the adhesive at each of the prying points, in turn.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。