メインコンテンツにスキップ

iPod Touch 7e generatie Vervanging van het voorste paneel

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。

英語
オランダ語

手順 12を翻訳中

手順12
iPod Touch 7th Generation Front Panel Replacement: 手順 0、 3の画像 1 iPod Touch 7th Generation Front Panel Replacement: 手順 0、 3の画像 2 iPod Touch 7th Generation Front Panel Replacement: 手順 0、 3の画像 3
  • Insert the plastic opening tool between the display assembly and the rear case near the top of the iPod.

  • Slightly twist the opening tool to pry the front panel up from the rear case.

  • Separate the display assembly from the iPod.

  • Do not try to completely remove the front panel, as it is still connected by several cables.

Steek je plastic openingstool tussen de schermmodule en de achterste behuizing, in de buurt van de bovenkant van de iPod.

Draai je openingstool lichtjes om om zo het voorste paneel uit de achterste behuizing omhoog te duwen.

Scheid de schermmodule van de iPod.

Probeer het voorste paneel nog niet volledig te verwijderen, aangezien deze nog steeds aan het toestel verbonden is door middel van een aantal kabels.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります