メインコンテンツにスキップ

Moto G6 Play リアガラスパネルの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 5を翻訳中

手順5
Moto G6 Play Rear Glass Panel Replacement: 手順 0、 3の画像 1 Moto G6 Play Rear Glass Panel Replacement: 手順 0、 3の画像 2 Moto G6 Play Rear Glass Panel Replacement: 手順 0、 3の画像 3
  • Slide the pick along the right edge of the rear glass to separate the adhesive underneath.

  • Take care to not insert the pick more than ~1 cm past the edge of the rear glass to avoid damaging the fingerprint sensor cable.

  • Leave the pick under the top right corner of the glass to prevent the adhesive from re-adhering. Continue with a new pick.

リアガラス右端に沿って開口ピックをスライドして、下に付けられた接着剤を切開します。

リアガラスの端より1cm以上奥に差し込まないようご注意ください。指紋センサーケーブルにダメージを与えてしまいます。

接着剤の再装着を防ぐため、ガラスの右上コーナーに開口ピックを残しておきます。続けて新しいピックを準備して次に進みます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります