注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 2を翻訳中
手順2
-
Once the screen is warm to the touch, apply a suction cup to the upper edge of the phone.
-
Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the plastic bezel. Start to cut the adhesive by sliding the opening pick to the top left corner.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。