メインコンテンツにスキップ

開口方法

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
Opening Procedure, Separate the screen adhesive: 手順 0、 3の画像 1 Opening Procedure, Separate the screen adhesive: 手順 0、 3の画像 2 Opening Procedure, Separate the screen adhesive: 手順 0、 3の画像 3
Separate the screen adhesive
  • Slide the opening pick around the lower left corner and up the left edge of the iPhone, slicing through the adhesive holding the display in place.

  • Don't insert your pick more than 3 mm, as you may damage internal components.

オープニングピックを本体下側の左端周辺までスライドします。それから、ディスプレイに留められた接着剤を切断しながら端に沿って本体上側に向けて移動します。

内部のパーツを破損する可能性があるため、3mm以上オープニングピックを差し込まないでください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります