メインコンテンツにスキップ

Samsung Galaxy S10eバックカバーの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
Samsung Galaxy S10e Back Cover Replacement, Secure a suction cup: 手順 0、 2の画像 1 Samsung Galaxy S10e Back Cover Replacement, Secure a suction cup: 手順 0、 2の画像 2
Secure a suction cup
  • Secure a suction cup to the back cover, as close to the heated edge as possible, just under the Bixby button where the adhesive is thinnest.

  • The suction cup will not make a good seal on the curved portion of the glass, so avoid putting it on the very edge.

  • If the phone's back cover is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります