注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 2を翻訳中
手順2
-
Remove three 4.0mm Phillips #0 screws from the top of the cover.
-
Remove two 6.0mm Phillips #0 screws underneath each of the back footpads.
-
Remove one 4.mm Phillips #0 screw beneath the divot.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。