修理を始めるには コミュニティ ストア

如何使用定制的胶带

ガイドに戻る
英語
中国語
前の手順 次の手順

手順 2を翻訳中

手順2
How to Apply Custom-cut Adhesive Strips, Prepare the surface: 手順 0、 3の画像 1 How to Apply Custom-cut Adhesive Strips, Prepare the surface: 手順 0、 3の画像 2 How to Apply Custom-cut Adhesive Strips, Prepare the surface: 手順 0、 3の画像 3
Prepare the surface

  • To ensure a good adhesive bond, both your device and part need to be thoroughly cleaned. This may take some time, but the results are worth the effort.

  • Remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or tweezers.

  • Don't use metal tools if you're cleaning display panels or glass covers, as the tools may scratch the surface.

  • Use adhesive remover or isopropyl alcohol (>70%) to remove residue from metal surfaces. Wipe in one direction with a lint-free cloth or coffee filter until all the adhesive residue is gone.

  • While isopropyl alcohol is generally safe to use on electronics, they will dissolve certain foam adhesives. Be careful to contain the alcohol when cleaning.

  • Allow the alcohol to completely evaporate from the device before reassembly.

准备好表面

为确保良好的粘合力，请彻底清洁粘合面。这可能需要一些时间，但结果值得你付出努力。

用手指、撬棒、塑料打开工具或镊子清除大块粘合剂。

如果要清洁显示屏面板或玻璃盖，请勿使用金属工具，因为这些工具可能会划伤表面。

使用除胶剂或高浓度（> 90％）异丙醇去除金属表面上的残留物。用不起毛的布或咖啡过滤器朝一个方向擦拭，直到所有残留的粘合剂消失。

虽然异丙醇通常可以安全地用于电子产品，但它们会溶解某些泡沫粘合剂。清洁时请小心容纳酒精，并在重新组装之前使其完全从设备中蒸发掉。

[title] Prepare the surface
-[* icon_note] To ensure a good adhesive bond, thoroughly clean the adhesion surfaces. This may take some time, but the results are worth the effort.
-[* black] Remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or tweezers.
- [* icon_caution] Do not use metal tools if you are cleaning display panels or glass covers, as the tools may scratch the surface.
-[* black] Use adhesive remover or high concentration (>90%) isopropyl alcohol to remove residue from metal surfaces. Wipe in one direction with a lint-free cloth or coffee filter until all the adhesive residue is gone.
- [* icon_note] While isopropyl alcohol is generally safe to use on electronics, they will dissolve certain foam adhesives. Be careful to contain the alcohol when cleaning, and allow it to completely evaporate from the device before re-assembly.
+[* icon_note] To ensure a good adhesive bond, both your device and part need to be thoroughly cleaned. This may take some time, but the results are worth the effort.
+[* black] Remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or [product|IF145-020|tweezers].
+ [* icon_caution] Don't use metal tools if you're cleaning display panels or glass covers, as the tools may scratch the surface.
+[* black] Use adhesive remover or isopropyl alcohol (>70%) to remove residue from metal surfaces. Wipe in one direction with a lint-free cloth or coffee filter until all the adhesive residue is gone.
+ [* icon_note] While isopropyl alcohol is generally safe to use on electronics, they will dissolve certain foam adhesives. Be careful to contain the alcohol when cleaning.
+ [* icon_note] Allow the alcohol to completely evaporate from the device before reassembly.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。