修理を始めるには コミュニティ ストア

맞춤형 접착 스트립 사용법

ガイドに戻る
英語
韓国語
前の手順 次の手順

手順 2を翻訳中

手順2
How to Apply Custom-cut Adhesive Strips, Prepare the surface: 手順 0、 3の画像 1 How to Apply Custom-cut Adhesive Strips, Prepare the surface: 手順 0、 3の画像 2 How to Apply Custom-cut Adhesive Strips, Prepare the surface: 手順 0、 3の画像 3
Prepare the surface

  • To ensure a good adhesive bond, both your device and part need to be thoroughly cleaned. This may take some time, but the results are worth the effort.

  • Remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or tweezers.

  • Don't use metal tools if you're cleaning display panels or glass covers, as the tools may scratch the surface.

  • Use adhesive remover or isopropyl alcohol (>70%) to remove residue from metal surfaces. Wipe in one direction with a lint-free cloth or coffee filter until all the adhesive residue is gone.

  • While isopropyl alcohol is generally safe to use on electronics, they will dissolve certain foam adhesives. Be careful to contain the alcohol when cleaning.

  • Allow the alcohol to completely evaporate from the device before reassembly.

표면 준비

확실한 접착력을 위해서 접착면을 철저히 청소하세요. 시간은 다소 걸리지만 결과는 그만한 가치가 있습니다.

손가락, spudger/스퍼저, 플라스틱 여는 도구 또는 핀셋으로 큼직한 접착제 덩어리를 제거하세요.

디스플레이 패널 또는 유리 커버는 표면이 긁힐 수 있으므로 청소할 때 금속 도구는 사용하지 마세요.

접착제 제거제 또는 고농도 (>90%) 이소프로필 알코올을 사용하여 금속 표면의 잔류물을 제거하세요. 무보풀 천 또는 커피 필터로 모든 접착제 잔여물이 없어질 때까지 한 방향으로 닦으세요.

이소프로필 알코올은 일반적으로 전자 제품에 사용하기에 안전하며 특정 폼 접착제를 녹입니다. 청소할 때 사용한 알코올은 다시 조립하기 전에 기기에서 완전히 증발하도록 하세요.

[title] Prepare the surface
-[* icon_note] To ensure a good adhesive bond, thoroughly clean the adhesion surfaces. This may take some time, but the results are worth the effort.
-[* black] Remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or tweezers.
- [* icon_caution] Do not use metal tools if you are cleaning display panels or glass covers, as the tools may scratch the surface.
-[* black] Use adhesive remover or high concentration (>90%) isopropyl alcohol to remove residue from metal surfaces. Wipe in one direction with a lint-free cloth or coffee filter until all the adhesive residue is gone.
- [* icon_note] While isopropyl alcohol is generally safe to use on electronics, they will dissolve certain foam adhesives. Be careful to contain the alcohol when cleaning, and allow it to completely evaporate from the device before re-assembly.
+[* icon_note] To ensure a good adhesive bond, both your device and part need to be thoroughly cleaned. This may take some time, but the results are worth the effort.
+[* black] Remove large chunks of adhesives with your fingers, spudger, plastic opening tool, or [product|IF145-020|tweezers].
+ [* icon_caution] Don't use metal tools if you're cleaning display panels or glass covers, as the tools may scratch the surface.
+[* black] Use adhesive remover or isopropyl alcohol (>70%) to remove residue from metal surfaces. Wipe in one direction with a lint-free cloth or coffee filter until all the adhesive residue is gone.
+ [* icon_note] While isopropyl alcohol is generally safe to use on electronics, they will dissolve certain foam adhesives. Be careful to contain the alcohol when cleaning.
+ [* icon_note] Allow the alcohol to completely evaporate from the device before reassembly.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。