Kobo Glo E-reader USB Port Replacement

手順1 — Remove the back panel and the screws.

Make sure to store the screws somewhere you won't loose them, like on your FixMat.

手順2 — Disconnect the ribbon cable

All you have to do is lift the black locking arm that is keeping the ribbon cable in place. See picture.

手順3 — Remove the motherboard

Carefully remove the motherboard from your e-reader.

手順4 — Check the voltage on all six motherboard pins

Check the voltage of all six pins: if a pin shows no voltage level this probably means the pin is loose.

手順5 — Resolder the disconnected pin(s)

Use as much flux as possible (i.e. with the use of a flux marker).

手順6 — Put back the motherboard

Carefully reassemble the parts.

手順7 — Final check

Make sure that the e-reader functions properly before completely reassembling and closing it.