メインコンテンツにスキップ

Apple Watch Series 5 拆解

手順 8を翻訳中

英語
中国語
手順8
Apple Watch Series 5 Teardown: 手順 0、 3の画像 1 Apple Watch Series 5 Teardown: 手順 0、 3の画像 2 Apple Watch Series 5 Teardown: 手順 0、 3の画像 3
  • Out comes this ticker’s brain, the all-new—or maybe not?—S5 system-in-package.

  • Although it benefits from a new compass and double the onboard storage—32 GB, up from 16—most of the integrated circuits remain entombed under a solid layer of resin, out of our reach. Of the few chips above the surface, here's what we can make out:

  • Skyworks 229-15 465371 1918 MX, most likely front-end module

  • 16 CJ

  • YY NCJ 7NE (likely the acceleration + gyro sensor)

  • API 924 920

  • Looking at the attached display flex cables and laying them over those of the Series 4 for comparison, we can see that the plug in the middle gained 4 pins and the one on the bottom gained 2. Without knowing their function, this closes the door on interchangeability.

手表的大脑出来啦,全新或者并不是?——S5 系统级封装。

即使得益于新的指南针,板载储存从 16 GB翻倍来到了 32 GB。大多数集成电路都固定在树脂之下,这是我们无法接触到的。在表面上方的一些芯片中,我们可以得出以下结论:

Skyworks 229-15 465371 1918 MX,可能是前端模块。

16 CJ

YY NCJ 7NE (可能是加速计和陀螺仪)

API 924 920

查看附着在显示屏上的柔性电缆并将它们和 Series 4 上的电缆进行比较,我们可以看到中间的插头有了4个针脚,而底部的一个有了2个针脚。在不知道其功能的情况下,这关上了互换性的大门。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります