メインコンテンツにスキップ

Apple Watch Series 5の分解

英語
日本語

手順 8を翻訳中

手順8
Apple Watch Series 5 Teardown: 手順 0、 3の画像 1 Apple Watch Series 5 Teardown: 手順 0、 3の画像 2 Apple Watch Series 5 Teardown: 手順 0、 3の画像 3
  • Out comes this ticker’s brain, the all-new—or maybe not?—S5 system-in-package.

  • Although it benefits from a new compass and double the onboard storage—32 GB, up from 16—most of the integrated circuits remain entombed under a solid layer of resin, out of our reach. Of the few chips above the surface, here's what we can make out:

  • Skyworks 229-15 465371 1918 MX, most likely front-end module

  • 16 CJ

  • YY NCJ 7NE (likely the acceleration + gyro sensor)

  • API 924 920

  • Looking at the attached display flex cables and laying them over those of the Series 4 for comparison, we can see that the plug in the middle gained 4 pins and the one on the bottom gained 2. Without knowing their function, this closes the door on interchangeability.

次に出てくるのはこの時計の脳ですーこれは真新しいものでしょうか、あるいは前と同じでしょうか?S5システムインパッケージ (SiP) です。

新コンパス機能が加わり、ストーレッジ容量が16GBから32GBへ倍増したという利点はありますが、この集積回路の大部分が、私たちの手が届かない樹脂の固い塊の中に埋もれています。表面にあるチップの幾つかは識別できました。

Skyworks 229-15 465371 1918 MX, フロントエンドモジュールの可能性が高い

16 CJ

YY NCJ 7NE (加速度計 + ジャイロセンサーのよう)

API 924 920

繋がったディスプレイのフレックスケーブルをSeries 4のケーブルと比較するために並べてみました。中央のプラグイン部分に4本のピンが増え、下側のプラグインには2本のピンが増えています。この機能を知らなくても、互換性のドアは閉じられました。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります