手順 3を翻訳中
手順3
Disassembling the Handle & Switch
-
The problem could also be in the handle, which like everything about this vacuum is difficult to service.
-
Remove one screw at the rear of the handle to release the top plate. Now pull. Hard. Straight up. Yes, in this miserable design the motor speed switch is friction fit.
-
Remove the rest of the screws to fully snap the handle apart (mine was stiff).
-
New switches are available, but you'll need a soldering iron and soldering skills for large wires to do work here.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。