修理を始めるには コミュニティ ストア

华为 Mate 10 后盖更换

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

ガイドに戻る
英語
中国語
前の手順 次の手順

手順 7を翻訳中

手順7
Huawei Mate 10 Back Cover Replacement, Prep the phone for a new back cover: 手順 0、 2の画像 1 Huawei Mate 10 Back Cover Replacement, Prep the phone for a new back cover: 手順 0、 2の画像 2
Prep the phone for a new back cover

  • Before you install a replacement back cover, be sure to remove all traces of perimeter adhesive from the phone frame.

  • If you are re-using the back cover, carefully remove all traces of adhesive from the back cover.

  • The glass back cover is fragile and prone to cracking. Don't apply uneven pressure to the back cover as you clean.

  • You may pull up chunks of the cover's color coating as you remove the adhesive. To reduce the chances of this occurring, apply heat or high concentration isopropyl alcohol to the adhesive to weaken it.

为手机准备新的后盖

在安装备用后盖之前，请确保从电话机框上清除掉所有周边粘合剂的痕迹。

如果要重新使用后盖，请小心地清除后盖上的所有粘合剂。

玻璃后盖易碎，容易破裂。清洁时，请勿在后盖上施加不均匀的压力。

去除粘合剂时，你可能会拉起盖子的彩色涂层的一部分。为了减少发生这种情况的可能性，请在粘合剂上加热或加高浓度的异丙醇以使其减弱。

[title] Prep the phone for a new back cover
[* icon_reminder] Before you install a replacement back cover, be sure to remove all traces of perimeter adhesive from the phone frame.
[* icon_reminder] If you are re-using the back cover, carefully remove all traces of adhesive from the back cover.
- [* icon_note] The glass back cover is fragile and prone to cracking. Do not apply uneven pressure to the back cover as you clean.
+ [* icon_note] The glass back cover is fragile and prone to cracking. Don't apply uneven pressure to the back cover as you clean.
[* black] You may pull up chunks of the cover's color coating as you remove the adhesive. To reduce the chances of this occurring, apply heat or high concentration isopropyl alcohol to the adhesive to weaken it.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。