修理を始めるには コミュニティ ストア

Reemplazo de la tapa trasera de Huawei Mate 10

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

ガイドに戻る
英語
スペイン語
前の手順 次の手順

手順 7を翻訳中

手順7
Huawei Mate 10 Back Cover Replacement, Prep the phone for a new back cover: 手順 0、 2の画像 1 Huawei Mate 10 Back Cover Replacement, Prep the phone for a new back cover: 手順 0、 2の画像 2
Prep the phone for a new back cover

  • Before you install a replacement back cover, be sure to remove all traces of perimeter adhesive from the phone frame.

  • If you are re-using the back cover, carefully remove all traces of adhesive from the back cover.

  • The glass back cover is fragile and prone to cracking. Don't apply uneven pressure to the back cover as you clean.

  • You may pull up chunks of the cover's color coating as you remove the adhesive. To reduce the chances of this occurring, apply heat or high concentration isopropyl alcohol to the adhesive to weaken it.

Preparar el teléfono para una tapa trasera nueva

Antes de instalar una tapa trasera de repuesto, asegúrate de quitar todos los rastros de adhesivo del perímetro del marco del teléfono.

Si estás reutilizando la tapa trasera, retira con cuidado todos los rastros de adhesivo de la tapa trasera.

La tapa trasera de vidrio es frágil y propensa a agrietarse. No apliques una presión desigual sobre la tapa trasera mientras limpias.

Se puede tirar de los trozos del revestimiento de color de la tapa a medida que se retira el adhesivo. Para reducir las posibilidades de que esto ocurra, aplica calor o alcohol isopropílico de alta concentración al adhesivo para debilitarlo.

[title] Prep the phone for a new back cover
[* icon_reminder] Before you install a replacement back cover, be sure to remove all traces of perimeter adhesive from the phone frame.
[* icon_reminder] If you are re-using the back cover, carefully remove all traces of adhesive from the back cover.
- [* icon_note] The glass back cover is fragile and prone to cracking. Do not apply uneven pressure to the back cover as you clean.
+ [* icon_note] The glass back cover is fragile and prone to cracking. Don't apply uneven pressure to the back cover as you clean.
[* black] You may pull up chunks of the cover's color coating as you remove the adhesive. To reduce the chances of this occurring, apply heat or high concentration isopropyl alcohol to the adhesive to weaken it.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。