メインコンテンツにスキップ

iPad Mini CDMA Wi-Fi/Bluetoothアンテナの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: 手順 0、 1の画像 1
  • The antenna cable is secured with two pieces of tape: the wide tape that continues onto the rear case, and its own small piece of tape that is covered by the wide tape.

  • In the next steps you'll be separating the wide tape from the antenna cable's tape with the tip of a spudger in the gap between the two pieces.

アンテナケーブルは2本のテープで固定されます。リアケース上まで伸びる幅広テープと、幅広テープで覆われた専用の小さなテープです。

次の手順では、2本のアンテナケーブルの隙間にスパッジャーの先端を差し込んで、アンテナケーブルのテープから幅広のテープを剥がします。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります