修理を始めるには コミュニティ ストア

Sostituzione batteria iPad Mini CDMA

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
前の手順 次の手順

手順 2を翻訳中

手順2
iPad Mini CDMA Battery Replacement: 手順 0、 2の画像 1 iPad Mini CDMA Battery Replacement: 手順 0、 2の画像 2

  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Flip the iPad back over and insert a plastic card between the top left battery and the rear case.

  • If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

Durante questa procedura dovrai infilare delle sottili schede in plastica tra la batteria e la copertura posteriore dell'iPad per separare l'adesivo che tiene ferma la batteria. Stai attento a tenere le schede il più piatte possibile per evitare di piegare la batteria, il che può danneggiarla e farle rilasciare dei pericolosi composti chimici.

Ruota l'iPad a faccia in su ed infila una scheda in plastica tra l'angolo superiore sinistro e la copertura posteriore.

Se incontri una notevole resistenza, scalda di nuovo l'iOpener e ripeti il passaggio precedente per ammorbidire ulteriormente l'adesivo.

[* icon_caution] Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.
-[* black] Flip the iPad back over and insert a plastic card between the top left battery and the rear case.
+[* black] Flip the iPad back over and insert a [product|IF145-101|plastic card] between the top left battery and the rear case.
[* icon_note] If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。