メインコンテンツにスキップ
英語
日本語

手順 6を翻訳中

手順6
The LCD panel is held in place with eight T10 Torx screws. After the screws are free, pivoting the LCD assembly yields the first glimpse of the treasures that lie beneath. Before you can lift up the LCD, carefully disconnect the vertical sync cable from the logic board.
  • The LCD panel is held in place with eight T10 Torx screws.

  • After the screws are free, pivoting the LCD assembly yields the first glimpse of the treasures that lie beneath.

  • Before you can lift up the LCD, carefully disconnect the vertical sync cable from the logic board.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります