注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 5を翻訳中
手順5
-
Lift the locking tab and remove the ribbon cable on the right hand lower edge of the motherboard.
-
Disconnect the mu;it-way connector on the top edge of the motherboard. Do not pull on th wires, but rather rock the body of the connector from side to side until it easily pulls free.
-
Gently lift off the video cable connector.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。