修理を始めるには コミュニティ ストア

MacBook Pro 15" Touch Bar 2018 Lower Case Replacement

英語
英語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

Disable Auto Boot

ガイド情報

= 完了 = 不完全

      ガイドの手順

      手順1

      Completely power off and unplug your MacBook Pro before you start. Close the display and flip the entire laptop upside-down.

      手順2

      Press a suction handle into place near the front edge of the lower case, between the screw holes.

      手順3

      Slide the corner of an opening pick into the gap you just created underneath the lower case.

      手順4

      Repeat the previous step on the other side, using an opening pick to to release the second clip.

      手順5

      Lift the front edge of the lower case (the side opposite the display hinge) enough to slide your fingertips underneath and get a good grip on it.

      手順6

      Pull firmly to slide the lower case towards the front edge of the MacBook (away from the hinge area) to separate the last of the clips securing the lower case.

      手順7

      Remove the lower case.

      クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。