Google Pixel 2 Opening Procedure

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての13個のガイドに反映されます。

英語

オランダ語

手順 2を翻訳中

手順2

Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case.
Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel.
This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer.
The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。