メインコンテンツにスキップ

Remplacement de l'ensemble LCD de l'iPad mini CDMA

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての42個のガイドに反映されます。

英語
フランス語

手順 7を翻訳中

手順7
iPad Mini CDMA LCD Assembly Replacement: 手順 0、 2の画像 1 iPad Mini CDMA LCD Assembly Replacement: 手順 0、 2の画像 2
  • The LCD is glued to the metal LCD shield plate behind it along the top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to shift the LCD a couple of millimeters left and right several times.

  • Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.

  • Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.

L'écran LCD est collé à la plaque de protection métallique du LCD, derrière celle-ci, le long des bords supérieur, gauche et droit. Afin de décoller cet adhésif en toute sécurité, vous utiliserez un médiator pour déplacer plusieurs fois l'écran LCD de quelques millimètres de gauche à droite.

Insérez un médiator dans l'espace entre l'écran LCD et la coque arrière, près du haut du côté gauche de l'écran LCD.

Inclinez légèrement le médiator pour l'éloigner de l'iPad, juste assez pour élargir l'espace entre l'écran LCD et la coque arrière.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります